Auxiliary equipment PYU-600, RK 01, MDSH 65-350, etc.

Anti-siphon skirts PYU-600, PYU-1000 are designed to prevent spillage (collection and removal) of oil at the wellhead when lifting and unscrewing tubing. At the request of the customer, it is possible to change the overall dimensions of the PU, the configuration of the PU (seals, suspension of the PU to the lifting unit) for full compliance with the conditions of a particular production. By prior agreement, design changes are allowed that improve the quality characteristics of the product.

• PYU-600. Technical specifications.
• PYU-1000. Technical specifications.

The RC and RC-01 cable rollers (with a cut-off device) are designed for the descent of an electric power cable of a submersible centrifugal pump into an oil well.

• RK. Technical specifications.
• RK 01. Technical specifications.

Hydraulic mixers are designed for mixing clay powders, weighting agents and chemicals in the liquid flow. It is part of the solution preparation blocks. They can transport the mixture to a height of up to 4 m.equipped with a rotary shutter that cuts off the flow of liquid at the end of loading.

• HS 65-10. Technical specifications.
• GS 125-10. Technical specifications.
• GS 150M. Technical specifications.

Bladed agitators of explosion-proof design ML VZG are designed for mixing solutions and preparing emulsions.

• ML VZG. Technical specifications.

The MDSH 65-350 throttle manifold is designed for the procedure of well development, after operations aimed at increasing oil recovery, in conditions of macroclimatic areas I - II according to GOST 16350-80.

• MDSH 65-350. Technical specifications.

Foundation mats are designed for the installation of technological equipment, in the conditions of macroclimatic areas I - II according to GOST 16350-80.

• MF-01, MF-01S, MF-02. Technical specifications.

Pipe wipers are designed for cleaning pump-compressor and process pipes from borehole fluids (oil, drilling fluids, salt solutions), preventing foreign objects from falling into the well during major and routine repairs. The wiper is made of polyurethane, wear-resistant and durable, has a good mechanical memory, has no chemical and ozone aging.

• The wiper for tubing pipes is uncut. Technical specifications.
• The wiper for tubing pipes is split. Technical specifications.

Cable gland seals are designed for sealing the cable entry of fountain fittings equipped with ESN.

• Cable gland. Technical specifications.

Gas-tight couplings are designed for joining seamless steel tubing and production columns used for the operation of oil, gas and injection wells pumping oil, gas and highly aggressive reservoir waters.

• Gas-tight couplings. A brief description.

The sealing head of GGU 210.000.SB is designed to seal the wellhead in order to prevent sudden releases of oil and gas that occur during repair work (flushing), or when performing various technological operations.

• GSU 210.000.SAT. A brief description.

Quick-release connection BRS are designed for quick connection and disconnection of high-pressure pipelines of cementing and other aggregates.

• BRS. A brief description.

Catalog